Reference
PNA Half Pallet
Squared for the 767 belly. Full IATA code, rate class, weights, volume and aircraft compatibility below.
- IATA ULD code
- PNA 767 half pallet with net
- Prefixes
- PQP, FQF, and PPC
- Rate class
- Type 8
- Aircraft compatibility
- 767, 787 lower hold
- Maximum gross weight
- 2,449 kg (5,399 lb)
- Tare weight
- 83 kg (183 lb)
- AS1825 volume
- 5.5 m³ (194 ft³)
About the PNA Half Pallet
A half pallet squared off for the 767 lower hold, built to the PNA code.
Sized so two units fit across the 767 and 787 belly, where a full-width pallet will not. At 83 kg it is among the lightest ULDs in service, which leaves more of the weight allowance for cargo.
What it carries
How it is built
- A half pallet squared off to fit the 767 lower hold.
- A flat aluminium sheet base with hardened edge rails that lock into the aircraft restraint system.
- Cargo built up on the base and held down by a net tensioned onto the edge rails.
- Contoured builds shape the load to the hold profile; squared-off builds use the full main-deck height instead.
- Wing variants add hinged or fixed-angle side extensions to carry cargo that overhangs the base.
Why it is used
- Takes cargo of almost any shape, since nothing encloses it.
- The lightest tare of any ULD for a given footprint, so more of the weight allowance goes to cargo.
- Stacks flat when empty, which keeps the cost of repositioning equipment down.
What to check before booking
- The cargo is exposed and the net is the only restraint, so the quality of the build-up decides whether the load arrives intact.
- The finished load has to match the hold contour or it will not fit.
- Nets and edge rails wear, and both are inspected before the unit is accepted.
Track your air cargo
Follow an air waybill from acceptance to delivery with live status and ETAs across every major carrier.