Reference
ATR 42 Cargo
The smaller ATR feeder freighter. Payload, cargo hold, door size and typical role below.
- Maximum payload
- 5,700 kg
- Cargo volume
- 51 m³
- Cargo hold (L × W × H)
- 13.85 × 2.26 × 1.75 m
- Cargo door
- 1.27 × 1.53 m
About the ATR 42 Cargo
The shorter ATR freighter, carrying a little under six tonnes on the same cross-section as the ATR 72.
It suits the thinner spokes of a feeder network, where the 72 would fly with empty space but the route still needs a daily service.
What it carries
How it is built
- A regional turboprop airframe converted to freight: cabin stripped, floor reinforced and a cargo door cut into the fuselage side.
- A side door rather than a ramp, so cargo is loaded piece by piece or on small pallets rather than driven aboard.
- Tie-down rails set into the floor, and a net or barrier separating the hold from the flight deck.
- Turboprop engines and a low approach speed, which is what lets these aircraft use short and lightly built runways.
Why it is used
- Economic on thin routes where even a narrowbody jet freighter would fly mostly empty.
- Operates from short regional strips that no jet freighter can use.
- Low block-hour cost, which suits scheduled feeder work and time-critical small consignments.
- Quick turnarounds, so a single aircraft can fly several sectors a day around a regional network.
What to check before booking
- Payload is a few tonnes, so anything substantial needs multiple rotations or a larger type.
- The side door limits piece size: nothing that will not turn through the opening.
- Range is short; these are feeder and regional aircraft, not line-haul equipment.
Track your air cargo
Follow an air waybill from acceptance to delivery with live status and ETAs across every major carrier.